PACIFIC LA23GCKC-P500A Thimble motor

Stepper motor LA23GCKC-P500A is an open-loop control element stepper motor that converts

electrical pulse signals into angular displacement or linear displacement. In the case

of non-overload, the motor speed and stop position only depend on the frequency and number of

pulse signals, and are not affected by load changes. When the stepper driver receives a pulse signal, LA23GCKC-P500A

will drive the progressive motor to rotate a fixed Angle in the set direction, which is called “step Angle”.

It rotates at a fixed Angle, step by step. The angular displacement can be controlled by controlling the number of pulses

so as to achieve the purpose of accurate positioning. At the same time, the speed and

acceleration of motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.

Stepper motor LA23GCKC-P500A is a kind of induction motor. Its working principle is to use

electronic circuit to convert DC into time-sharing power supply and multiphase timing control current.

Only by using this current to power the stepper motor can the stepper motor work normally.

Stepping motor LA23GCKC-P500A as the executive component, is one of the key products of

mechatronics, widely used in various automatic control systems. With the development of microelectronics

and computer technology, the demand for stepper motor is increasing day by day, and it has been applied in various national economic fields.