RHUB200-5 galvanic isolated serial line interface module

The RSER200-4 is a module in the Kongsberg RIO200 module family. These modules provide functions such as I/O interface,
network hub/repeater and serial line interface. They have the same shape and are mechanically mounted on a horizontal
dual-rail system.
The RSER200-4 is a four channel, galvanic isolated, serial line, interface module that can be linked to one, two or three
controllers (RCUs). The four Þeld channels are individually conÞgurable as either RS232, RS422, RS485 or NMEA 0183 for
connection to Þeld equipment. There are three Link Channel interfaces for connection to the controllers.
Category:

Description

RHUB200-5 galvanic isolated serial line interface module

This document is intended to be used for HW engineering, hook-up and maintenance. Physical interfaces and capabilities
are described.
The RSER200-4 is a module in the Kongsberg RIO200 module family. These modules provide functions such as I/O interface,
network hub/repeater and serial line interface. They have the same shape and are mechanically mounted on a horizontal
dual-rail system.
The RSER200-4 is a four channel, galvanic isolated, serial line, interface module that can be linked to one, two or three
controllers (RCUs). The four Þeld channels are individually conÞgurable as either RS232, RS422, RS485 or NMEA 0183 for
connection to Þeld equipment. There are three Link Channel interfaces for connection to the controllers.
The RSER200-4 is powered by the RBUS connectors.
The RSER200-4 contains the following features:
• Isolated serial line Þeld channels
• Run/error LED on front showing module status
• Blinking LEDs on front showing transmit and receive data activity for each channel
• All internal voltages are monitored
• Allow hot module replacement
• Compliant to standards IEC 60945 and IACS E10

The RSER200-4 is a serial line module used for connecting
serial line equipment to RCU(s) in single or redundant controller systems.
The module can be connected to up to three controllers (A, B, C) via the three RJ45 connectors (P1, P2, P3), and up to four Þeld
equipment (1, 2, 3, 4) via the four terminal blocks (X1, X2, X3, X4).
The module contains a USB interface (P4) intended for test and service purposes. It provides functions to monitor the serial line
activity and the general status of the module.
The RSER200-4 consists of the main function blocks as shown in the function diagram (see Figure 1 for block/function diagram
of the RSER200-4).
• Power supply
• Processor and channel logic
• Link and Þeld interfaces
• USB interface
• LEDs (Status, RX and TX)

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “RHUB200-5 galvanic isolated serial line interface module”

Your email address will not be published. Required fields are marked *

Post comment