VE3004 Controller module

DP device data without additional wiring or field wiring!
The field power supply for the device, or the field power supply passing through the carrier

in the field terminal or as a bus, must be disassembled before disassembly or disassembly,

the unit can be disassembled or live power supply when the system is running in the following

cases :(note that only one unit can be disassembled at a time.)
When the KJ1501X1-BC1 system is used in tandem with the 24 VDC or 12 VDC input power

supply, the inductance of the input power must be less than 23 or a certified open circuit power supply

Category:

Description

DP device data without additional wiring or field wiring!
The field power supply for the device, or the field power supply passing through the

carrier in the field terminal or as a bus, must be disassembled before disassembly or

disassembly, the unit can be disassembled or live power supply when the system is running

in the following cases :(note that only one unit can be disassembled at a time.)

VE3004

When the KJ1501X1-BC1 system is used in tandem with the 24 VDC or 12 VDC input power supply,

the inductance of the input power must be less than 23 or a certified open circuit power supply
Voltage, Ui is 12.6 VDC,Lo is less than 23uh(including wire inductance). Non-spark field circuits must be

powered off before disassembly and insertion. The rotary fast control system ensures compatibility between the

1/0 card and the terminal and the terminal is installed. The junction box must be used if the key is set for the 1/0 card
To provide field power to this device, or field power through the carrier at the field terminal or as a bus, the connected

device must be removed before disassembly or disassembly, and all 1/0 cycle assessment nodes with limited energy

must be completed. This unit can be removed or plugged into the power supply while the system is running in the following

cases: Note that only one unit can be removed at a time to power the system power supply. When used with the

KJ1501X1-BC1 system, it runs at 24 VDC or 12 VDC input power. The inductance of the primary circuit routing input

power must be less than 23 or a certified open power supply circuit, U is 12.6 vd.LO small thousand 23uh/ line inductance).

The rotary fast control system ensures compatibility between the /0 card and the terminal Mingse is installed, and the junction

box must be used if the /0 card has a key set. Do not use the terminal block fuse to disassemble the field power supply of the

non-spark circuit.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com