ILX34-MBS485 Controllogix systems communication

The ILX34-MBS485 is a third-party product that can be plugged into Controllogix systems for serial communication over the ModbusRTU

protocol. It is a module that allows three different sizes of data blocks, the communication format is data-SINT, and the slot number is selected

according to the actual insertion position.The specific use process of this module can be divided into 3 steps:Hardware configuration:

Create a new project in Studio 5000 software for hardware configuration. Added ILX34-MBS485 module, which is 1734-Moudle in Other type.

Click OK, and the module setting dialog box will pop up to set parameters. The connection parameters depend on the application currently being used,

and the module allows 3 different size blocks of data. Set Communication Format to Data-SINt format, and Slot ID to the actual slot position in the rack.

It is recommended that the Request Packet Interval (RPI) value be greater than 50ms, and then click Apply and Confirm.

ACC-5595-208-350-805595-208N

Import the vendor AIO: Add a cascade in Main Routine, right-click the cascade, import the cascade, and navigate to the.l5x file.
Debug tool tests: Tests are performed in debug tool tests (slave station) and debug tool tests (master station).
In addition, the ILX34-MBS485 module is connected to the 1756 EtherNet/IP network through the 1734-AENTR module.