0-60063-2 ROCKWELL PC DR Regulator Board

The functions of the regulator 0-60063-2 are as follows: 1. Adjust the output voltage of the generator;

2, prevent charging current is too large; 3, in the case of countercurrent cut off the charging circuit,

in the case of countercurrent, the relay will quickly cut off the charging circuit.

The function of the regulator is to protect the battery, is the battery charge protection device, so as

not to overcharge and affect the life. It is designed to efficiently transfer power between the storage

element and the system supply track, using the same inductors in reversible step-down and boost operations.

Principle: The regulator 0-60063-2 has a detection circuit inside, when the battery voltage is higher

than the set value (generally 14v or 28v), the switch tube will be disconnected, stop supplying

power to the generator excitation coil, the generator can only idle without excitation current (stop

generating electricity). When the voltage is lower than 12v, the switch tube will be switched on, and the

generator will get an exciting current before generating electricity. When the engine speed changes, the regulator

can automatically change the current of the excitation coil, so that the engine output is more stable.

The leading products in the market are the third and fourth generation regulators, but there are still

differences due to different models. Domestic cars have all adopted the introduced technology of the generator – that is,

all adopt the fourth generation regulator; In order to reduce costs, most low-grade trucks and agricultural

vehicles use second generation regulators; Mid-to-high-end trucks use a wide range of regulators, with second,

third and fourth generation regulators in use; Due to the large number of electric appliances, the high

power generator of passenger car basically adopts the fourth generation regulator with higher stability. The

real fourth-generation IC regulator manufacturing process is very strict and scale production can

reduce the cost, only with a considerable level of professional technology, equipment level and scale

of professional manufacturers to produce.