中文版
Description
Product details:
- 3664/3674
- 24 VDC
- Dual DO, serial (recommended for de-energize-to-trip control programs)
- 32, commoned
- 16-30 VDC
- 36 VDC
- < 1.5 VDC, typical
- 2A per point
10A surge per 10 ms - 2 mA maximum
- 1,500 VDC minimum
- 3664 — Stuck-On point, all others commanded state – On or Off
3674 — Stuck-On point, all others commanded Off (de-energized) - Dark blue
The analog input (AI) module consists of three separate input channels. Each input channel receives variable voltage signals from each point, converts them to digital values, and transmits the values to the three main processor on-demand modules. In TMR mode, a median selection algorithm is then used to select a value to ensure correct data for each scan. Each input point is sensed to prevent… The way to perform a single failure on one channel affects another. Each analog input module is maintained intact and each channel is continuously diagnosed. Any diagnostic failure channel activates the fault indicator module, which in turn activates the chassis alarm signal. The module fault indicator reports only one channel fault, not the module fault. The module fault indicates how many two fault channels can operate normally. The analog input module supports hot backup, enabling online replacement of faulty modules. The analog input module requires a separate external terminal panel (ETP) connected to the Tricon by cable
The bottom plate. Each module has mechanical keys for proper installation of the Tricon chassis.
• Model 3625N (DO 6255) is a 24 VDC digital output module with 32 output points using a common reference point. In addition to the Through/Failure/Active indicator, this module also has indicator lights to show if each of the 32 output points is on or off. This module uses the NG common Core.
• Model 3601TN (EDO 5781) is a 115 VAC digital output module with 16 outputs do not use a common reference point. In addition to the Pass/Fail/activity indicator, the module has indicators to show if each of the 16 output points is on or off. Model 3601TN has been approved for use with the Tricon V9 platform and through software that is functionally equivalent to the Tricon V10 platform.
• Model 3603TN (TSDO/HVDO 6273) is a 120 VDC digital output module with 16 outputs using a common reference point. In addition to the Pass/Fail/activity indicator, the module has indicators to show if each of the 16 output points is on or off. Model 3603TN was approved for use with the Tricon V9 platform and re-passed through software that is functionally equivalent to the Tricon V10 platform.
• Model 3607EN (EDO 5781) is a 48 VDC digital output module with 16 outputs do not use a common reference point. In addition to the Pass/Fail/activity indicator, the module has indicators to show if each of the 16 output points is on or off. Model 3607EN has been approved for use with the Tricon V9 platform and has passed software that is functional equivalent to the Tricon V10 platform.
• Model 3623TN (TSDO2 5940) is a 120 VDC supervised digital output module with 16 outputs using common reference points. In addition to the Through/Failure/Active indicators, the module has indicators to show if every 16 output points are on or off. Model 3623TN was approved for re-certification with the Tricon V9 platform and functionally equivalent software through the Tricon V10 platform.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
