Description

TRICON 3708E Communication Modules (TCM)

International Approvals

The Tricon controller has been certified as complying with multiple internationally recognized standards by the following internationally recognized
certification agencies, these certifications have qualified the Tricon for use around the world in safety critical applications. Test reports from the various
certification agencies are available upon request.
TÜV Rheinland — TÜV has certified that the Tricon v9 and v10 controllers are in full compliance with the internationally recognized standards
listed below, and thus are qualified for use in the following applications and jurisdictions.
• Emergency safety shut-down or other critical control applications requiring SIL 1-3 certification per the functional safety requirements of
IEC 61508 9 (only Tricon v9.6 or later)
• Emergency safety shut-down or other critical control applications requiring AK 1-AK6 certification per the functional safety requirements of
DIN V 19250 and DIN V VDE 0801 (only Tricon v9.x)
• Fire and gas detection applications requiring certification per the requirements of EN 54
• Fire and gas detection applications requiring certification per the requirements of NFPA 72 (only Tricon v9.6 or later)
• Burner management applications requiring certification per the requirements of DIN VDE 0116
• Burner management applications requiring certification per the requirements of NFPA 8501 or NFPA 8502 (only Tricon v9.6 or later)
• All applications in the European Union or other jurisdictions requiring compliance with the EMC Directive No. 89/336/EEC and Low Voltage
Equipment Directive No. 72/23/EEC
• All applications in the European Union or other jurisdictions requiring compliance with the ATEX Directive No. 94/9/EC for Zone 2, Group IIB
hazardous locations
• Environmental, health, and safety applications in semiconductor manufacturing facilities per the requirements of SEMI S2
For hazardous location applications, see the Tricon Planning and Installation Guide for application-specific installation instructions

3708E

Power Modules

Each Tricon chassis is equipped with two Power Modules—either one is fully capable of running the Tricon at
full load and rated temperature. Each Power Module can be replaced online.
The Power Modules, located on the left side of the chassis, convert line power to DC power appropriate for all Tricon
modules. Terminal strips for system grounding, incoming power and hardwired alarms are located on the lower
left corner of the backplane. Incoming power should be rated for a minimum of 240 watts per power supply.
The Power Module alarm contacts are actuated when:
• A module is missing from the system
• The hardware configuration conflicts with the control program’s logical configuration
• A module fails
• A Main Processor detects a system fault
• Primary power to a Power Module fails
• A Power Module has a “Low Battery” or “Over Temperature” warning

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com