AIP830  Operation Keyboard for Singleloop Operation

This document describes the hardware specifications of AIP830 Operation Keyboard for Single-loop Operation for
Desktop Type HIS.
It contains an independent USB speaker (a sound function) other than buzzing alarms (buzzer sounds).
An AIP830 keyboard can be used per one Desktop Type HIS.

For installation specifications and environmental conditions, which are common to the systems, refer to “System
Overview” (GS 33K01A10-50E, GS 33K01A20-50E).
• Type: Flat keyboard (Sound Function: USB Speaker)
• PC Interface: Interface Connector: USB A type x 2 (*1)
Conformable USB standard
Operation Keyboard Function : USB 2.0 (Full-speed, Bus-powered)
Sound Function : USB 1.1 (Full-speed, Bus-powered)
• Input Voltage: 5 V±5 % (Supplied from USB Port of PC)
• Maximum Consumption Current: 1 A
• Weight: 2.0kg (Without VESA Bracket), 2.5 kg (With VESA Braceket) (*2)
• Chassis Color: Black (Equivalent to Munsell No. N1.5)
• AIP830 belongs to IEC 61010-1 installation category Class I
(A device not directly connected with the main power supply).
• Operating Environment
Ambient temperature:
5 to 40 °C (for normal operaiton)
-20 to 60 °C (in storage and transportation)
Ambient humidity:
20 to 80 %RH (Non-condensing)
*1: Both connectors must always be connected directly to a PC.
*2: AIP830 with VESA Bracket must be mounted where it holds at least 10 kg of weight.

AIP830-101/EIM

For the detailed information of the following standards, refer to “System Overview” (GS 33K01A10-50E,GS 33K01A20
-50E).
Safety Standards
[CSA] (*1)
[CE Marking] (*2)
EMC Conformity Standards
[CE Marking] (*2) (*5)
[C-Tick Marking] (*3)
[KC Marking] (*4)
*1: AIP830 complies to CSA only when CSA mark is indicated on the PC which connects with AIP830.
*2: AIP830 complies to CE Marking only when CE mark is indicated on the PC which connects with AIP830.
*3: AIP830 complies to C-tick marking ionly when it is indicated on the PC which connects with AIP830.
*4: AIP830 complies to KC Marking only when KC mark is indicated on the PC which connects with AIP830.
*5: EN 61000-3-2 and EN 61000-3-3 in CE Marking are out of scope for AIP830.