The General Electric I/O TC2000 analog board DS200TCCBG1B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The board is also equipped with three jumpers. The
GE I/O TC2000 analog board DS200TCCBG1ANE has an 80196 microprocessor and several PROM modules. The DS200TCCBG1ANE also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. Leds can be used to indicate whether the board is
DS200TCCBG1ALD Configuration: Hardware: The Mark V LM's generator and bus voltage monitoring capabilities, as well as line current monitoring capabilities, are provided by hardware jumpers J1, J2, J3, J4 and J5. The RS232 serial port is connected to the DCOM through the hardware jumper J14. J15 and J16 are the hardware jumpers used for testing.
GE I/O TC2000 analog board DS200TCCBG1ALD has an 80196 microprocessor and several PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The PROM module stores the configuration file of the microprocessor and
GE I/O TC2000 analog board DS200TCCAG2B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The GE I/O TC2000 analog board DS200TCCAG1B is also equipped with
GE I/O TC2000 analog board DS200TCCAG2A has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The GE I/O TC2000 analog board DS200TCCAG1B is also equipped with
GE I/O TC2000 analog board DS200TCCAG1B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The GE I/O TC2000 analog board DS200TCCAG1B is also equipped with
GE I/O TC2000 analog board DS200TCCAG1A has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. Because the GE I/O TC2000 analog board DS200TCCAG1A is equipped with
The DS200TBSAG1AAA is part of a variety of printed circuit boards developed as internal components of the Speedtornic Mark V Series industrial power generation turbine system. The MK V is one of a series of industrial turbine control systems from General Electric. The unit is one of the printed circuit boards designated as LM transducer
DS200TBSAG1A is one of a number of circuit board modules that can be used in the Speedtronic Mark V turbine based application module. The DS200 series printed circuit board is an internal component of the Mark V Series mount that allows processing and execution of a variety of applications. [caption id="attachment_21219" align="aligncenter" width="450"] DS200TBSAG1A[/caption] The
中文版
