The IS420UCSCH1B is a single-machine controller. It doesn't have any fans or batteries. The device does not have any user-configurable jumper Settings. The front panel of the controller provides two USB ports and five other ports as well as multiple LED indicators. Other controllers provide extended I/O. The unit can be used in applications such
The IS420UCSCH1A is a quad-core 1.2GHz AMD G-series processor. It has been certified for use in dangerous places. This type of installation usually has its own installation requirements. These can be found in GE's Mark VIe and Mark VIeS Control Systems General Application System Guide (Volume II), GE number GEH-6721. [caption id="attachment_21217" align="aligncenter"
The IS420UCSBS1A is a controller for GE Mark VIe systems. This was one of the last Speedtronic systems released by GE for managing industrial gas and steam turbines. The IS420UCSBS1A is one of five UCSB controllers available in the Mark VIe system. It is a quad-core controller that delivers high performance and optimal reliability. The
The IS420UCSBH4A is one of a number of controllers designed by GE for its Mark IVe Speedtronic system. The Mark VIe was the last Speedtronic system released by GE for managing industrial turbine systems. It is one of five UCSB controller modules available. The IS420UCSBH4A is designed as a single module that connects to external
The IS420UCSBH3A is one of a number of controllers designed by GE for its Mark IVe Speedtronic system. The Mark VIe was the last Speedtronic system released by GE for managing industrial turbine systems. It is one of five UCSB controller modules available. The IS420UCSBH3A is built on a quad-core processor with application software pre-installed.
The IS420UCSBH1A is designed to be mounted directly into the panel metal plate, with the device's heat sink kept unobstructed to allow appropriate airflow. The front-end design of the IS420UCSBH1A has three Ethernet ports for connecting to the R/S/TI/O network, and three additional ENET ports for connecting to HNMI, other controllers, Historians, and point-to-point connections.
[caption id="attachment_21219" align="aligncenter" width="450"] IS420UCSBH3A[/caption] The IS420UCSBH3A is a single-module controller that uses its onboard I/O network to connect to I/O packets. Older controllers in previous Speedtronic systems implemented the same type of interface via backplane connectors. The device is air-cooled. It doesn't have onboard fans or batteries, but it does have a built-in power
The IS420UCPAH2A is built using a 332 MHz Freescale 3308 processor and has 64 MB of RAM and 256 MB of onboard flash memory. The controller uses the QNX operating system. The device is usually mounted on a base [caption id="attachment_21218" align="aligncenter" width="450"] IS420UCPAH2A[/caption] IS420UCPAH2A is one of two UCPA controllers available for the Mark
The IS420PUAAH1A allows for channel-by-channel debugging by providing independently wired black sections that allow users to use fewer panels and reduce system footprint. The module has 16 simplex analog channels. These can be configured separately as Thermocouple input/output Thermal resistance input/output Voltage input 4-20 mA current input 0-20 mA current output Pulse accumulator Input of
The IS420UCPAH1A contains several components within its shell. This includes an IS400BPPCH2A processor board and an IS400STWCH1A base I/O board. The STWCH1A board adds four digital I/ OS, two analog inputs, and two Hall effect pulse inputs. The IS420UCPAH1A features a smaller panel footprint and a single 12-VDC power supply capable of operating at a
中文版
