UMAC is Delta Tau's system-level controller that can not only be configured to customize your UMAC system for your application, but it can also be a professional controller with built-in I/O and power supply and a complete case. At the same time, this controller has a complete communication mode such as high-speed USB, Ethernet or
The 1900/65A Universal Device Monitor is designed to continuously monitor and protect equipment for a variety of applications and industries. The low cost of the monitor makes it an ideal solution for general-purpose machines and processes that benefit from continuous monitoring and protection. input The 1900/65A offers four sensor inputs and four temperature inputs. The
The 1900/65 Universal Equipment Monitor is a mechanical vibration monitor, Designed for continuous monitoring and protection for a variety of applications And industry equipment. The low cost of 1900/65 made it a machine and Ideal solutions for processes, these machines and processes can benefit from continuous monitoring and protection, but cannot prove it The cost
The 3300 XL NSv* Proximity Sensor system is suitable for centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with stringent installation requirements. The 3300 XL NSv proximity Sensor system includes: 3300 NSv probe 3300 NSv extension cable 3300 XL NSv front-end * sensor. 1 The primary use of the
description The 3300 XL 25mm sensor system consists of a separate 25mm probe, one stick The extension cable consists of a 3300 XL 25mm preloader. 0.787 V/mm (20 mV/mil) output gives the system a linear range of 12.7 mm (500 mils). Based on This linear range, 3300 XL 25mm sensor system is suitable for Measurement
GE's Bently Nevada offers a wide variety of seismic and acceleration sensors, each designed to handle harsh industrial environments, and many capable of being installed in hazardous areas when appropriate barriers are used. The following sensors provide comparable performance to other seismic sensors, but allow for use at higher temperatures. Characteristics and advantages 330450 high
GE Bently Nevada offers a wide variety of vibration and thrust transmitters, each designed to handle the rigors of industrial environments, and many capable of being installed in hazardous areas when appropriate methods are used. The 990 Vibration transmitter is primarily targeted at Original equipment manufacturers (Oems) with centrifugal air compressors or small pumps, motors
The hydraulic dynamic pressure sensor system is composed of 350300 hydraulic dynamic pressure sensor using piezoresistive sensing technology and 146824 interconnection cable. It is used to measure static and dynamic pressures in fluid machinery, such as water turbines or centrifugal pumps. For hydraulic turbine applications, this measurement helps our customers monitor hydraulic phenomena such as
The 3500/25 Enhanced Keyphasor® Module is a semi-high dual-channel module used to provide key trust numbers to monitor modules in Rack 3500. The module receives an input signal from the proximity probe or magnetic pickup and converts the signal into a digital Keyphasor® signal that indicates when the Keyphasor mark on the shaft coincides with
The 16 channel relay module is a full height module that provides 16 relay outputs. Any number of 16-channel relay modules can be placed in any slot on the right side of the rack interface module. Each output of the 16-channel relay module can be programmed independently to perform the required voting logic. Each relay