The 3500/40M Proximitor® Monitor is a 4-channel monitor that accepts input from a Bently Nevada proximity sensor, adjusts the signal to provide a variety of vibration and position measurements, and compares the adjusted signal to a user-programmable alert. Users can program each channel of 3500/40m using 3500 rack configuration software to perform any of the
The 3500/42M Proximitor*/Seismic Monitor is a 4-channel monitor that takes input from proximity sensors and seismic sensors, modulates the signal to provide various vibration and position measurements, and compares the modulated signal to user-programmable alerts. Each channel of 3500/42m can be programmed by the user using 3500 rack configuration software to perform any of the
ABB PM802F/ABB PM803F Overview: ABB PM802F/ABB PM803F on the AC800F controller mainboard has 6 slots and 1 power slot, among which 2 slots adopt fast DMA technology for direct high-speed data communication with the CPU. These 2 slots realize the information transmission of the control layer based on standard TCP/IP Ethernet by inserting Ethernet modules.
ABB SA801F/ABB SA811F/ABB SD802F/ABB SD812F Overview ABB SA801F/ABB SA811F/ABB SD802F/ABB SD812F power module provides access to the CPU motherboard and slot E1, E2 and F1... Module power supply of F4 slot. ABB SA811F and ABB SD812F power supplies can provide high energy output, suitable for PM803F applications. The power module provides short circuit and overload
ABB Controller AC800F Overview ABB Controller AC800F uses standard Ethernet as the system communication bus, the bus standard is DIN ISO 8802.3. Ethernet module is the interface device between controller and system bus. ABB Controller AC800F Design 2 slots for inserting various types of Ethernet modules, with F1... Ethernet modules cannot be inserted or removed
ABB FreeLance AC800F fieldbus module FI810F/FI820F/FI830F/FI840F ABB FreeLance AC800F Overview The ABB AC800F controller supports four fieldbus modules, which are CAN module FI810F, serial interface module FI820F, FrofiBUS module FI830F, and FF/HSE module FI840F. The bus type is optional according to the control requirements. ABB AC800F controller is designed in 4 slots F1 to F4
ABB S800 I/O Overview ABB S800 I/O is a fully distributed modular processing I/O system that connects the master controller to the PLC(program logic control system) via an industry standard fieldbus. Due to its extensive connectivity, it is suitable for a variety of processing controllers and PLCS made by ABB and others. Because it can
ABB S800 I/O Overview ABB S800 I/O is a fully distributed modular processing I/O system that connects the master controller to the PLC(program logic control system) via an industry standard fieldbus. Due to its extensive connectivity, it is suitable for a variety of processing controllers and PLCS made by ABB and others. Because it can
ABB Tensimeter Millmate Strip tension measurement system overview The ABB Tensimeter Millmate strip tension measuring system features ultra-high impact and overload resistance, fatigue resistance, long-term stability, no moving parts, and insensitivity to electrical interference on site. Reduce mill downtime caused by unpredictable failures and increase production. The ABB Tensimeter Millmate Strip tension measuring system is
AC800M Controller Product Introduction AC800M is an important component of the Compact Products 800 series products, which is a modular controller based on rail installation, It includes CPU, communication module, power module, and a series of accessories. Integrating multiple communication functions can achieve more than a full range of functions, And it supports a wide
中文版
