HE700GEN200   Horner APG uGENI VME Interface Module

Description

HE700GEN200   Horner APG uGENI VME Interface Module

The Horner APG HE700GEN100 / HE700GEN200 uGENI VME Interface Module interfaces with GE Fanuc VME racks.

These modules are configurable with the Dip switches on the board and have screw-type connectors on the front panel.

HE700GEN100: Single Channel Genius Interface Module for VME Backplane
HE700GEN200: Dual Channel Genius Interface Module for VME Backplane

HE700GEN200

Normally, a GE Fanuc programmable controller runs the network, through a PLC module called a Genius
Bus Controller (GBC). The HE700GEN100/200 has the ability to replace or exist in conjunction with a
Genius Bus Controller. Up to 32 devices are wired in a daisy chained fashion. Network devices support
four communications terminals, Serial 1, Serial 2, Shield In and Shield Out. The network is terminated at
each end with an appropriate terminating resistor. The value of the resistor should be chosen to match
the characteristic impedance of the cable. Refer to GE Fanuc Automation publication GFK-90486 for
help in selecting an appropriate cable type for your application. Note: If the characteristic impedance of
the cable is unknown, 120 ohm terminating resistors should be used.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com