IC660TSA100 GE Terminal assembly

The GE Fanuc IC660TSA100 terminal assembly is the terminal assembly for the I/O block from GE

Fanuc which has the catalog number IC660BBA100. This I/O block is a voltage and current I/O block with

2 outputs and 4 inputs. The IC660BBA100 block is a 115 Volts AC rated voltage and current analog I/O block. The

electronics assembly which is compatible with the IC660BBA100 block and the IC660TSA100 terminal assembly has

the catalog number IC660EBA100. The weight of the I/O block is approximately 4 pounds and the dimensions are 224.4 x 33.4 x 39.1

millimeters. LEDs are provided on the IC660BBA100 I/O block and they are the “I/O Enabled” and “Unit OK” LEDs. The

block to block isolation rating of the block and the IC660TSA100 terminal assembly that is part of it is 1500 Volts and the heat dissipation rating is 6 Watts.

IC660TSA100

The nominal operating voltage for the IC660BBA100 block, and by extension the IC660TSA100 terminal assembly, is 98

to 132 Volts AC. The maximum power consumption rating is 10 VA. The IC660BBA100 block can accept 47 to 63 Hertz of

line frequency. The power supply dropout time for the I/O block is 1 cycle. The absolute accuracy is +/-0.2% of the full scale. The

maximum accuracy is +/-0.5% of the full scale. In the presence of strong RF interference, the accuracy may be degraded to

+/-0.5% of full scale reading plus 0.5% of the reading. The thermal drift at 25 degrees Celsius is 50 millivolts in the 10 Volts range,

25 millivolts on the 5 Volts range, and 100 milliamps in the 4 to 20 milliamps range. Each circuit on the IC660BBA100 can provide

or accept signals in the following ranges: 0 to 5 Volts DC, 0 to 10 Volts DC, 4 to 20 milliamps or 1 to 5 Volts DC, -10 to 10 Volts DC, and -5 to 5 Volts DC.