IC694TBB032  terminal block   

Description

IC694MDL754   Rx3i PacSystem Input Module

The IC694TBB032 is a terminal block component that is mainly part of the PACSystem RX3i Programmable

Automation Controller (PAC) series. This series is formerly produced by GE Intelligent Platforms (GE IP)

however, recently acquired by Emerson Automation. This module is a 36-pin, box-style terminal block that

comes with screw-type connections. The IC694TBB032 is designed to be used with High-density I/O modules

particularly, discrete input and output modules. It is also compatible with some Series 90-30 I/O modules. This

terminal assembly comes in Two (2) parts, the module cover and the terminal block itself. These components are

assembled together which is then attached to the I/O module. Recommended wire size for signal termination must

be # 14-26 American Wire Gauge (AWG), solid or stranded copper wire. Each conductor must be stripped at a

maximum length of 0.310 inches o7 7.87 mm from the tip to properly terminate. The terminal block is also provided

with a stripping reference at the bottom which can be used to comply with the recommended stripping length. Each

connection must be tightened up to 7 lb-in. Removable terminal blocks such as the IC694TBB032 are designed to

provide modularity and ease of maintenance. In case of a module failure, the electronic assembly can be easily

replaced without the need of dismantling the existing connections. This effectively lessens the downtime or maintenance

time of the module and simplifies the troubleshooting method however, during replacement of electronics assembly,

it is recommended to remove power from the module to prevent possible equipment damage.

IC694TBB032  

The GE Fanuc IC694TBB032 terminal block is a terminal block from the RX3i series. It is equipped with 36

pins for connections. The front of the block has a terminal block door and the rear end of the block is designed with

open architecture. The outer cover of the block has thicker insulation than the inner section to accommodate the

thicker wires. The terminal block is a box-style block and it is made of high-quality materials. It is a high strength and

compact component. This box-style terminal block is 0.5 inches deep and is able to accommodate the 0.31-inch strip wire. The

IC694TBB032 terminal block can be used with high-density modules and I/O modules. The box has screw terminals that are used for making the connections.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com