IC695ETM001 IC695ETM001-EK Ethernet Interface Module

The Ethernet Interface Module, IC695ETM001, connects a PACSystems RX3i controller to an Ethernet network. It enables
the RX3i controller to communicate with other PACSystems equipment and with Series 90 and VersaMax controllers. The
Ethernet Interface provides Transmission Control Protocol and Internet Protocol (TCP/IP) communications with other control
systems, host computers running the Host Communications Toolkit or programmer software, and computers running the
TCP/IP version of the programming software. These communications use the Service Request Transport Protocol
(SRTP), Modbus TCP, and Ethernet Global Data (EGD) protocols over a four-layer TCP/IP (Internet) stack.

IC695ETM001-EK

Features of the RX3i Ethernet Interface include:
▪ Full programming and configuration services. Firmware upgrades from the RX3i CPU using the WinLoader
software utility, which is supplied with updates to the Ethernet Interface software.
▪ Periodic data exchange using Ethernet Global Data (EGD).
▪ EGD Commands to read and write controller and EGD exchange memory over the network.
▪ TCP/IP communication services using SRTP.
▪ Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client
▪ Built-in Station Manager for on-line supervisory access to the Ethernet Interface. Dedicated Station Manager port.
▪ Two auto-sensing 10Base T / 100Base TX RJ-45 shielded twisted-pair Ethernet ports for direct connection to either
a 10BaseT or 100BaseTX IEEE 802.3 network without an external transceiver. There is only one interface to the
network (only one Ethernet MAC address and only one IP address).
▪ Internal network switch with Auto negotiate, Sense, Speed, and crossover detection.
▪ Recessed Ethernet Restart pushbutton permits manually restarting the Ethernet firmware without power cycling the system.