IC695PSA140 120/240VAC or 125VC Power Supply

Power Supply IC695PSA140 is a multi-purpose 40-Watt supply that
operates from an input voltage source in the range of 85 to 264 VAC
or 100 VDC to 300 VDC.
This power supply provides three outputs:
■ +5.1 VDC output,
■ +24 VDC relay output that can be used to power circuits on Output Relay modules.
■ +3.3 VDC. This output is used internally by RX3i modules with IC695 catalog numbers.

Category:

Description

IC695PSA140 120/240VAC or 125VC Power Supply

Power Supply IC695PSA140 is a multi-purpose 40-Watt supply that
operates from an input voltage source in the range of 85 to 264 VAC
or 100 VDC to 300 VDC.
This power supply provides three outputs:
■ +5.1 VDC output,
■ +24 VDC relay output that can be used to power circuits on Output Relay modules.
■ +3.3 VDC. This output is used internally by RX3i modules with IC695 catalog numbers.
This Power Supply is suitable for use in load-sharing and redundancy
applications. Up to 4 Multi-purpose power supplies (PSA140 and/or
PSD140) can be used in a PACSystems RX3i (IC695 catalog number)
Universal Backplane. Use these Power Supplies if the number of
modules required exceeds the capacity of one Power Supply. This
Power Supply occupies two backplane slots.

• WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS
I, DIVISION 2;
• WARNING – EXPLOSION HAZARD – WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE
REPLACING OR WIRING MODULES; AND
• WARNING – EXPLOSION HAZARD – DO NOT CONNECT OR DISCONNECT EQUIPMENT UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.
• EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D, DIV. 2 HAZARDOUS LOCATIONS
IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS LOCATIONS ONLY
• The tightening torque range for the control terminals is 9.6-11.5 in. lb. Use only wire rated for 90°C. Be sure to
observe any additional ratings that are provided with the modules.
• Batteries: Replace Battery with Matsushita Part No. BR2477A Only. Use of another battery may present a risk of fire
or explosion.” “Caution, Battery may explode if mistreated. Do Not recharge, disassemble or dispose of in fire”. The
correct battery type is available as Accessory Kit IC698ACC701.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “IC695PSA140 120/240VAC or 125VC Power Supply”

Your email address will not be published. Required fields are marked *

Post comment