IC698CPE030 600 MegaHertz Pentium M CPU

The IC698CPE030 processor is installed with a computer level microprocessor that is, 600MHz Pentium-M microprocessor

with 64 MB of user memory and 64 MB of user flash memory. It exhibits Boolean execution speed of 0.069ms per 1000

Boolean contacts/coils. This CPU can accommodate up to 32 K bits of Discrete I/O and 32 K Words of Analog I/O. Up to

512 program blocks can be downloaded to this CPU wherein each program block can have a maximum of 128 KB memory.

The IC698CPE030 also has Two (2) Ethernet communication ports that is capable of auto-sensing of network transmission

speed and may be configured for half and full duplex operating mode. The built-in Webserver and File Transfer Protocol (FTP)

functionality is accessible via these ethernet ports, allowing users to remotely monitor and configure the processor. Aside from the built-in Ethernet ports,

this CPU also has One (1) RS232 port; One (1) RS485 port and One (1) Station manager port. These communication interfaces

support SRTP, Modbus TCP Server and Client, Ethernet Global Data (EGD) for Ethernet based communication and Modbus RTU Slave, SNP, Serial I/O for serial communication.

IC698CPE030

The GE Fanuc IC698CPE030 CPU supports the Series 90-70 discrete and analog I/O modules,

communication modules, the Series 90-70 supported VME modules, and a wide range of programmers

and HMI modules. The IC698CPE030 CPU has a voltage rating of +5, +12, or -12 Volt DC, and a backplane

current rating of 3.4 Amps at 5 Volts DC. The IC698CPE030 CPU has an isolated RS-485 serial port, an RS-232

serial port, and a dedicated RS-232 Ethernet station manager port. The IC698CPE030 CPU also has dual

embedded Ethernet (10/100 MB) ports that provide Ethernet Global Data (EGD) data exchange, TCP/IP high-speed

data transmission, support for the Modbus/TCP Server, Modbus/TCP Client, and SRTP Channel protocols, and

it can communicate with programmers and HMI devices. The IC698CPE030 CPU is configured with the Proficy Machine

Edition (ME) Logic Developer configuration software version 4.5 or later which provides an advanced application

programming environment, and it supports data monitoring over the web via Web servers and FTP connections.