中文版
Description
IC698PSA350D GE power supply module
[service contact information]
Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen
① 24-hour email reply (12 hours);
③ For shipment to countries outside Asia, please contact the seller.
| Brand | GE Fanuc |
| Series | PACSystem RX7i |
| Manufacturer | GE Fanuc |
| Manufacturer | GE Intelligent Platforms (Former); Emerson Automation (Current) |
| Part Number | IC698PSA350 |
| Product Description | Power Supply module |
| Series | PACSystem RX7i |
| Description | Power Supply module |
| Nominal Rated Voltage | 120/240 VAC, 125 VDC |
| Part Number | IC698PSA350 |
| Power | 100 watts |
| Input Voltage Range | 85 to 264 VAC; 100-150VDC |
| Nominal Input frequency | 120/240 VAC, 125VDC |
| Frequency | 47-63 Hertz |
| Input Power | 437 watts (typical); 500 watts (maximum) |
| AC Input Frequency | 47-63 Hz |
| Temperature | 0-60 degrees celsius |
| Output Power | 350 Watts on total Three (3) outputs |
| Input Power | 125 Watts, typical; 150 Watts, maximum |
IC698PSA350D
IC698PSA350 is a PACSystems Power Supply Module produced by GE Fanuc for the RX7i series. This module delivers +5 VDC, +12 VDC, and -12 VDC power. In addition, it sends logic level sequencing signals to modules on the backplane. The module plugs into slot 0 in the main rack.
The IC698PSA350 module’s power supply output may lose one AC input line cycle while maintaining output power. Overcurrent and overvoltage fault protection is provided in addition to electronic short circuit protection. The module permits 100 watts total output power at ambient temperatures of 0 to 60ºC without forced air cooling.
Output voltages are as follows: +5 VDC output to 60 amps, +12 VDC output to 12 amps, and -12 VDC output to 4 amps.
More notable features of the IC698PSA350 module include operation from 85 to 264 VAC or 100 to 150 VDC. The module is equipped with AC operation power factor correction and easy slide-in rack mount construction.
The two-position On/Off logic level switch can be found on the front faceplate. It has the capability to enable or disable output channels and will not disturb the AC line input. Important warning: Lethal voltages are present in the module when input power is present.
Green LED indicators on the IC698PSA350 module monitor the status of field and output. These will turn ON when power is applied within the acceptable range and when DC output channels are operating correctly. A red LED specific to this module will alert the user if critical supply temp is too high or if there is an issue with airflow.
1. What are the protective limits available to the IC698PSA350?
The IC698PSA350’s protective limits are ride through and holdup time with duration of 15 ms and 5 ms, respectively.
2. What is the operating temperature of the IC698PSA350?
The IC698PSA350 power supply has operating temperature of 0degrees C to 60degrees C (32degrees F to 140degrees F).
3. What are the Inrush current rating of the IC698PSA350?
Inrush current rating are 30 A @ 115 VAC and 60 A @ 230 VAC with inrush current duration of 100 ms.
1. What is the output power of the IC698PSA350?
The IC698PSA350 has an output power of 350 Watts.
2. What is the cooling method used by this high-capacity power supply?
The IC698PSA350 uses a 70 CFM forced air cooling fan.
3. What are the protection features available to the IC698PSA350?
The IC698PSA350 has an overcurrent and overvoltage protection as well as an air flow protection.
Main business:
①ABB AC800M series modules, industrial robot spare parts dsqcseries, Bailey infi90,800xa, advantocs with master software, with mod300 software advantocs, freelance-distributed control system of process industry,
Symphony Melody, Sattocs, Symphony DCI System Six, Harmony/Infi90, Security System
② CPU module of ②Schneider 140 series products
③General electric series products IC693 IC695 IC697 IC698
Relay protection SR469 start SR369 start SR489 start SR750 start
Is200/is215/is220/is420/ds200/ds215/VMI VME beginning 7750 7807
④Ticonex series products 3721,3503,4351B,3625,3009.
⑤Bently (Bentley) 3500 series big card small card 1900 series power supply module
3500/15 3500/20 3500/22M 3500/42M 3500/25 3500/32 3500/53
⑥Allen-Bradley (AB, USA) series products 1394, beginning 2711, beginning 1756,1747, etc
⑦ EMERSON /Westinghouse series products OVATION system, WDPF system and MAX0 system spare parts.
DELTAV DELTAV VE3008/CE3008/SE3008/VE3007/VE3006SE4006P2
⑧Foxboro: I/A Series system, FBM (field input/output module) FCP270/FCP280/FBM201…FBM242 for sequence control, ladder logic control, accident recall processing, digital-analog conversion, input/output signal
processing, data communication and processing, etc.
⑨Siemens: Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Attending bosch rexroth (bosch rexroth): Indramat, I/O module, PLC controller, drive module, etc.
Motorola: MVME 162, MVME 167, MVME5500, MVME6100 and other series.
[Friendly reminder]
payment:
bank transfer or Escrow or Paypal or Western Union.
we accept USD and RMB payment both.
Leadtime:
some stock parts can ship out within 3-5days. Some is 3-4weeks for booking.
I. Mode of transportation and mode of freight:
① According to the shipping companies in different regions. (If you need to specify a transportation company, please contact the seller)
② Freight and transportation price (excluding national customs fees and other expenses) shall be subject to the actual freight price provided by the seller.
③ In China (including Hongkong, Macau and Taiwan Province), most of the shipping is free. Please contact the staff.
II. Payment method:
Please choose the payment method according to the actual situation. If you have any questions, please contact the seller! ！ ！ ！ ！
III. Product quality and after-sales service:
1. Consult the seller’s product quality and buy again. If you have any questions, please contact the seller.
2. During after-sales service, as the case may be. If you want to delay the after-sales service, otherwise the seller’s after-sales policy shall prevail. Please contact the seller.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
Reviews
There are no reviews yet.