Description
Technical Specifications AL8XGTE-3
The AL8xGTe is a two channel A/D board for the PCI Express x1 bus. It is optimized for high-speed transient capture at a sampling rate of 1, 1.5, 2 or 3 GSsamples/sec at very high repetition rates. A large dual-ported onboard buffer memory allows simultaneous transient recording and readout of captured data. A post-processing section can be used to extract peak information on multiple gates while the captured data is transferred over the PCI Express bus into the PC’s main memory. The analog inputs are DC-coupled and terminated with 50 Ohms impedance for high signal fidelity over the entire analog bandwidth of over 1 GHz. Input voltage ranges are programmable from 125mVp-p to 2Vp-p. One or two A/D converters with 8 bits resolution sample the input signal at 1.0 or 1.5 Gsamples/sec. Board versions with two A/D converters can either sample both input channels simultaneously at 1.0 or 1.5 Gsamples/sec or use both A/D converters on the same channel in an interleaved fashion to achieve 2.0 or 3.0 Gsamples/sec effective sampling rates.
The sampled data is stored in an onboard memory buffer of up to 4 Gsamples. The size of this buffer memory determines the maximum length of an acquisition. The board will be ready to accept a trigger about 2 microseconds after the end of the previous acquisition, which allows for repetition rates well beyond 100 kHz for short acquisitions. The sampling clock is generated on the board and not available externally. Lower sampling rates of 750, 500, 375, 333, 250 Msamples/sec down to 244 kSamples/sec are created by decimating the sampled data while reading it from the buffer memory. Reading data from the buffer memory occurs simultaneously with acquisition and does not affect repetition rate.
The sampled data is transferred over the PCI Express bus using DMA, thus requiring no CPU intervention to achieve high transfer rates. During this data transfer, a set of peak detectors can be used to monitor the sample stream and extract peak position and threshold crossing data over selected pieces of the sampled
data. A large selection of flexible triggering modes allows the user to tailor the behavior of the board to many applications. In addition to the standard software-generated trigger, the board can be triggered by a threshold crossing of the analog input signal on any channel or a signal fed to the BNC Trigger connector, a digital TTL signal on the internal trigger connector or a position-derived trigger from an encoder or motor of a scanning system. The BNC Trigger and internal trigger connectors can also drive a trigger signal as an output; for instance, to fire an ultrasonic pulser/receiver. This driver supports special modes that can be used to trigger multiple boards simultaneously from any of the connected boards, simply by tying the BNC Trigger or internal trigger connectors together. A simple oscilloscope program is included with the board. It allows evaluation of the various configurations and triggering modes of this board. Drivers and a DLL implementing OKOS Solutions’ software provide easy access to the functionality of the board from a user application.
This article is from the official website of Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. Please attach this link: http://www.sauldcs.com/
Contact us🎈🎈Sunny
Sales manager : Sunny
Mobile / WhatsApp : +86-18059884797
Skype : +86-18059884797
Tel: 18059884797 (WeChat with the same number)
QQ:3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen
① 24-hour email reply (12 hours);
③ For shipment to countries outside Asia, please contact the seller.
Official website: www.xiongbagk.cn
Whether it is factory new products, new surplus products or remanufactured products, Xiamen Xiongba Sani can find the parts you need and has a great advantage in terms of price and product
E-mail: sales@xiongbagk.cn
We have been committed to doing higher, faster, better, hope to do better in the future, I will be your most loyal partner
[Friendly reminder]
I. Mode of Transportation and freight:
①, according to the shipping company in different regions. (If you need to designate a shipping company, please contact the seller)
(2) Freight and transportation price (excluding national customs handling charges and other expenses) shall be subject to the actual freight price provided by the seller.
(3) In China (including Hong Kong, Macao and Taiwan), most shipping is free. Please contact the staff.
II. Terms of Payment:
Buyers please choose the payment method according to the actual situation, if you have any questions, please contact the seller!! ! ! ! Iii. Product quality and after-sales Service
1. Consult the seller about product quality and buy again. If you have any questions, please contact the seller.
2, after-sales service period, depending on the situation. If you want to delay the after-sales service, otherwise the seller’s after-sales policy shall prevail. Please contact the seller.
Recommend other products:
EMERSON PR6423/010-140+CON021 | SEW 8141649.53 | GE DS200TCRAG1ACC |
SIEGER 05701-A-0512 | PROSOFT MVI69-PDPMV1 | GE DS200TCPDG2BEC |
ABB PP846 3BSE042238R1 | LKB LKB2211 SUPERRAC | GE IS200TPROH1BBB |
ABB PFEA112-20 3BSE050091R20 | BEIJER 04380A | GE DS200TCPDG1BEC |
ABB PFEA112-20 3BSE030369R0020 | RELIANCE 805405-1R | GE IC695CPU315-CD |
FOXBORO FBM232 P0926GW | ABB 07KT92 CS31 | GE IC695ETM001-EK |
ABB PFEA111-65 | ABB PM856AK01 | ABB UFC911B106 3BHE037864R0106 |
EPRO PR6424/010-130+CON011 | GE IC200UEX626 | ABB PCD235B1101 3BHE032025R1101 |
ELAU MC-4/11/05/230 | PACIFIC SC755A-001-01 | GE IC695CPU315 |
KONGSBERG RCU502 | ABB PHARPS32000000 | GE IC695ETM001 |
Pacific Scientific H32NCHA-LNN-NS-00 | HONEYWELL CC-TDIL61 | NI USB-6525 |
PARKER GV6K-U6E | ABB BC810K01 3BSE031154R1 | GE VMIVME-2532A |
HEIDENHAIN PLD 16-8 | ABB 3BSE008538R1 | HIMA 4135A |
BENTLY 3500/05-01-01-00-00-01 | ABB KUC755AE105 3BHB005243R0105 | SIEMENS 3RK3131-2AC10 |
ABB PM510V16 | ABB PFEA113-20 3BSE028144R0020 | PFEIFFER CMR361 |
YOKOGAWA SPW482-53 | GE IC695CRU320-EJ | BENTLY 3500/22M 138607-01 |
MOXA EDS-518A-MM-SC | MSPC MSPC-6886/6800 | BENTLY 3500/22M 288055-01 |
Disclaimer of liability:
Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. We sell new products and discontinued products, independent channels to buy such special products. Xiamen Xiongba Electronic Commerce Co., LTD. Zhangzhou Branch is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association with or authorization of any rights holder.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
Reviews
There are no reviews yet.