8502-BI-DP MTL Bus interface module

Description

Technical Specifications 8502-BI-DP

Protection in the case of indirect contact If there is no safe separation or reinforcing edge between the hazardous voltage and the safe extra-low voltage, the safe extra-low voltage must be treated in the same way as the hazardous voltage. • Pay attention to product characteristics during installation, such as the use of isolators in specific voltage ranges, attenuation, installation position, small bend radius of wires, and electrical safety. • There is at least one functional edge between the support guide and adjacent modules. If the application requires a higher degree of edge (basic or reinforced edge), then appropriate measures must be used to achieve a higher degree of edge (for example, partition). • Applicable guidelines and regulations must be followed in the PDC. • Note the ambient temperature and noted characteristics (e.g. attenuation) in the data sheet and the guide attached to the package. 2.6 Equipment Replacement • The power supply voltage for the entire application must be turned off before removing the product from the application or placing the product into the application. • The power supply voltage is not allowed to be switched on until the entire application is built. 2.7 Overheating • Pay attention to product related features such as attenuation and installation position during installation. • Choose the safety device according to the load. 2.8 Grounding Grounding is classified into functional grounding (FE) and protective grounding (PE). Functional grounding is only used to increase resistance. It is not intended as contact protection for personnel. Protective grounding is a low impedance current path that reduces the risk to the operator in case of failure. Failure situations also include high voltage failure and/or failure of the current between the circuit and the ground. Protective grounding is mostly used outside the low voltage protection range. Protective grounding (PE) Protective grounding is used to protect personnel and machines from dangerous voltage damage. Only in accordance with the regulations and according to the application of the appropriate grounding situation, to the greatest extent to avoid the occurrence of hazards. Functional grounding (FE) Functional grounding is used to improve resistance. Function Grounding FE is used to lead away interference sources only. It is not intended as contact protection for personnel. 2.9 Requirements for power supply voltage

This article is from the official website of Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. Please attach this link: http://www.sauldcs.com/

8502-BI-DP

Contact us🎈🎈Sunny

Sales manager : Sunny

Mobile / WhatsApp : +86-18059884797

Skype : +86-18059884797

Tel: 18059884797 (WeChat with the same number)

QQ：3095989363

Email: sales@xiongbagk.cn

Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen

① 24-hour email reply (12 hours);

③ For shipment to countries outside Asia, please contact the seller.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com