IC660BPM100 PowerTrac Block Module

The IC660BPM100 is a PowerTrac Block Module. This module is essentially a Power Monitoring

device that comes with Genius I/O capability, capable of being directly integrated to Series 90-3,

Series 90-70, PACSystem RX3i, and other devices that support the Genius Bus Protocol. This module

is formerly manufactured by GE Fanuc Automation, currently under Emerson Automation. The

IC660BPM100 is used to voltage and current along with their respective parameters. Specifically,

the IC660BPM100 can be used in determining RMS voltage, current, active power, reactive power,

KWH, and power factor specifically, Phase to phase (wye and delta) and Phase to neutral (wye

system) for voltage; Per phase and neutral for current; Active current, Power and reactive indication

per phase;

IC660BBD025

Effective System Power factor (PF). Each value and data calculation are updated every

Two (2) seconds. Aside from the measurement of the mentioned parameters, the IC660BPM100 is

also capable of detecting overcurrent transients with a configurable threshold value. It can be

mounted near a machine or process as it supports Genius communication protocol where data

captured and processed by the IC660BPM100 PowerTrac is transmitted to the host controller via the

Genius Bus. The IC660BPM100 converts the analog measurement into digitized waveforms for

easy and simple analysis of the parameters. This device accepts 3-phase voltage input with an

input voltage range of 0-120VAC at 47-63 Hz; Input current of 0-5 Amperes, the nominal range at

47-63 Hz. It has built-in status LEDs indicators that depict Unit OK and Communications OK. The

IC660BPM100 has an operating temperature of 5.21” w. X 11.00” h. X 8.06” d. or 13.23cm w. X

27.94cm h. X 20.47cm d. It has an operating temperature of 0 to +60 Degree Celsius or +32F to +140 Degree Fahrenheit.