IC693CPU374 GE single-slot CPU module

Description

IC693CPU374 GE single-slot CPU module

[service contact information]

Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen

① 24-hour email reply (12 hours);

③ For shipment to countries outside Asia, please contact the seller.

Product Information  

• General: The GE Fanuc IC693CPU374 is a single-slot CPU module with a processor speed of 133 MHz. This module is embedded with an Ethernet interface.
• Memory: The total user memory used by the IC693CPU374 is 240 KB. The actual size associated with program memory for the user primarily depends on the configured memory types, such as Register memory (%R), Analog input (%AI) and Analog output (%AO). The amount of memory configured for each of these memory types is 128 to around 32,640 words.
• Power: The power required for the IC693CPU374 is 7.4 watts from 5V DC voltage. It also supports a RS-485 port when the power is supplied. The protocol SNP and SNPX are supported by this module when the power is supplied through this port.
• Operation: This module is operated within the ambient temperature range of 0°C to 60°C. The temperature required for the storage is in between -40° C and +85°C.
• Features: The IC693CPU374 is equipped with two Ethernet ports, which both have auto sensing capabilities. This module has eight baseplates for each system, including a CPU baseplate. The remaining 7 are expansion or remote baseplates and are compatible with a programmable communication coprocessor.
• Battery: The IC693CPU374 module’s battery backup can run for several months. The internal battery can serve as the power supply for up to 1.2 months, and an optional external battery can support the module for a maximum of 12 months.

IC693CPU374

The IC693CPU374 is a GE Fanuc Programmable Logic Controller (PLC) module from the 90-30 series. This module is a processor module that is used to host the user program, execute the logic and managed data exchanges to and from the processor via the embedded communication ports.

The IC693CPU374 may also be referred to as a controller. This controller has built-in microprocessor with embedded 586 processor with processing speed of 133 MHz. It has a typical scan rate of 0.15 miliseconds per 1K Boolean contact logic. This controller module has a single slot width that is installed to the 90-30 PLC rack.

The IC693CPU374 has a user memory of 240KB. It has Two (2) Ethernet communication ports that supports transmission speed of 10/100 Mbps with auto-sensing capability. These ports enable the controller to be connected to an Ethernet network for communication with programming workstations such as desktop or laptop computers, communication with Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems as well as other processors for messaging functions. This controller may also be communicated through the RS485 communication interfaces that can be found on the power supply whether standard or high-capacity power supply.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com