IC695ETM001 Ethernet Interface Module

Description

IC695ETM001 Ethernet Interface Module

The Ethernet Interface Module, IC695ETM001, connects a PACSystems RX3i controller to
an Ethernet network. It enables the RX3i controller to communicate with other PACSystems
equipment and with Series 90 and VersaMax controllers. The Ethernet Interface provides
TCP/IP communications with other PLCs, host computers running the Host Communications
Toolkit or programmer software, and computers running the TCP/IP version of the
programming software. These communications use the GE Fanuc SRTP and Ethernet
Global Data (EGD) protocols over a four-layer TCP/IP (Internet) stack.

IC695ETM001-EK

Features of the RX3i Ethernet Interface include:
▪ The Ethernet Interface implements the capabilities of a Class 1 and Class 2 device.
▪ Full PLC programming and configuration services. Firmware upgrades from the PLC
CPU using the WinLoader software utility. WInLoader is supplied with any updates to
the Ethernet Interface software.
▪ Periodic data exchange using Ethernet Global Data (EGD).
▪ EGD Commands to read and write PLC and EGD exchange memory over the network.
▪ TCP/IP communication services using SRTP.
▪ Built-in Station Manager for on-line supervisory access to the Ethernet Interface.
Dedicated Station Manager port.
▪ Two auto-sensing 10Base T / 100Base TX RJ-45 shielded twisted-pair Ethernet ports
for direct connection to either a 10BaseT or 100BaseTX IEEE 802.3 network without an
external transceiver. There is only one interface to the network (only one Ethernet MAC
address and only one IP address).

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com