GE WES5162-9101 Loop communication interface module (1) Arbitration bus: Since the VME BUS can have multiple master devices, the master that gets the bus pulls the BUS BUSY LINE (BBSY) down to indicate that the bus is being applied. When BBSY is not low, the bus arbitrator will sample the bus request line BRO --
Powerful bus function The controller of the VME bus maps each address space to memory. Usually, the memory on the controller board goes to address 0, and the controller board I/O goes to the high end of the memory. The middle address is used to map the address on the VME bus. VME bus supports
Digital output/input module Wes532-111 16-channel general digital output/input module The 5050 has 16 digital input/output channels, each of which can be configured as input or output via a DIP switch. The digital output is an open-collector output that can be used to control solid-state relays (SSR), and thus heaters, pumps, and power sets Be ready;
Special module The special module includes a single slot programmable coprocessor module (PCM), a microprocessor built into the module makes the module both It can be used as communication module and programmable module. New powerful single-board computers are now available for complex applications It should not increase the burden of the logical controller. Communication module
GE WES5120 5120-1106 Channel displacement monitor module Series 90-70 CPU Based on Intel processor, can improve the technical performance of production. Power modules and racks The Psus can be easily installed and can power up to two racks through cables. The rack is suitable for CPU, local I/O, and remote Ground I/O. Discrete I/O module GE
GE WES5120 5120-1506 Relay module Modular design is the hallmark of GE Fanuc products, and the VersamaxI/O is no exception A true modular system. A Versamax IO station consists of a bus interface unit (NIU), multiple The field cable base is composed of multiple field I/O modules. Each VersaMax IO station can be supported at most
GE WES13-3 High speed counting module A compact single-slot CPU module with two main processors in the CPU. One is Intel Micro The processor is used to handle some analog or special function control. The other is Boolean coprocessors for holding Line speed switching control. 2) floating-point arithmetic function. 3) The system baseboard bus adopts
GE D20 MIC 10BASE-T Servo controller The Multilin D20/D200 Substation Controllers offer an industry leading design embedded with high value substation automation applications that provide cost savings, increased reliability, and improved operational efficiencies in electric power substations. The ability to support a wide range of communication protocols and applications, allows the D20 to be interoperable with a
The D20 main case has three modem slots with modems WESDAC D20 Modem: •1200 baud, 202 modem Telenetics modem: •2400 baud, dual-line dial-up modem •Telenetics 14400 baud, 2-line dial-up modem •Telenetics 14400 baud, 4-wire, private line modem D20 Power input options Auxiliary power supply can be used to accommodate other Voltage range. D20EME Ethernet/memory board
GE WESDAC D20ME Robot board WESDAC D20ME This CPU model 350 serves as a controller, I/O system and dedicated module designed to meet the needs of flexible industrial solutions. In addition, it comes with 32KB of user memory, 4K I/O, 8 racks, and 0.22msec/K logic execution. It is compatible with Ethernet, various bus modules and control