The DS200TCEAG2B is an emergency overdrive plate that is part of the GE Speedtronic Mark V gas turbine control system. The DS200TCEAG1B General Electric emergency overdrive board contains a microprocessor and several programmable read-only memory (PROM) modules. Also included are three fuses, 30 jumpers, and a pair of bayonet connections. The board keeps an eye
The GE Con tact Pilot Board DS200CPCAG1A features one 12-pin connector and two 2-pin connectors. It also has four terminals and can connect up to twelve signal wires. The GE contactor test panel DS200CPCAG1A is also fitted with a 24VDC socket power relay. Because the boards have wiring terminals, the service personnel must remove the
The DS200TCEAG1B is an emergency overdrive plate that is part of the GE Speedtronic Mark V gas turbine control system. The DS200TCEAG1B General Electric emergency overdrive board contains a microprocessor and several programmable read-only memory (PROM) modules. Also included are three fuses, 30 jumpers, and a pair of bayonet connections. The board keeps an eye
The Mark V Speedtronic DS200TCDAH1B is a Mark V Speedtronic digital I/O board. The DS200TCDAH1B has a microprocessor and multiple PROM modules. All digital input or contact input is terminated and adjusted by DS200TCDAH1B. The DS200TCDAH1B has a block made up of ten LED lights and a pair of fifty pin connectors. This I/O board
The Speedtronic Mark V gas turbine control system is one of the most mature derivatives of the Speedtronic family. The Mark V system is designed to meet all gas turbine control requirements. The Mark V control board and control card part numbers belong to the DS200 series. The Mark V turbine control system uses a
The Speedtronic Mark V gas turbine control system is one of the most mature derivatives of the Speedtronic family. The Mark V system is designed to meet all gas turbine control requirements. The Mark V control board and control card part numbers belong to the DS200 series. The Mark V turbine control system uses a
The Speedtronic Mark V gas turbine control system is one of the most mature derivatives of the Speedtronic family. The Mark V system is designed to meet all gas turbine control requirements. The Mark V control board and control card part numbers belong to the DS200 series. The Mark V turbine control system uses a
The GE digital I/O board DS200TCDAH1B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAGH1B is also fitted with 8 jumpers and 1 LED visible from the side of the board. The GE digital I/O board DS200TCDAH1B also
GE digital I/O board DS200TCDAG2B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAG2B is also fitted with eight jumpers and one LED visible from the side of the board. The 50-pin connector on the GE digital I/O
The DS200TCDAG1BDB Mark V Speedtronic board is used as a digital I/O circuit board. The Mark V is one of several turbine control systems created by GE under the Speedtronic umbrella. These systems are designed to provide reliable management and control of industrial gas and steam turbine systems. The DS200TCDAG1BDB is used as the interface
中文版
