The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley Nevada System 1TM machine management software. TDI separates the functions of 3500/20 framework interface modules (RIM) and communication handlers such as TDXnet. The TDI operates in the RIM slot of the 3500/22M frame and is used in conjunction
The 3500/15 AC and DC power supplies are half-height modules and must be installed in the specified slot on the left side of the rack. The 3500 rack can contain one or two power supplies with any combination of AC and DC. Either power supply can power the entire rack. The 3500/15 AC and DC
LAM 853-049542-173 Lam Researc PCB board> xiongba Lam Research - the most low-key company among the five semiconductor devices. Lam RESEARCH was founded in 1984 by David Lam, a Hong Kong native. Lam can be understood as a company derived from the surname Lin in mainland China. (Lin means Lam in Minnan, which comes
The GE RST overflow board DS200TCQCG1A is fitted with 24 jumpers and 3 40-pin connectors. It also features three 34-pin connectors and one 16-pin connector. The ID assigned to the 16-pin connector is JC. The ids assigned to the 40-pin connector are JFF, JE, and 6PL. Jumpers on the GE RST overflow board DS200TCQCG1A are
[caption id="attachment_21151" align="aligncenter" width="550"] DS200TCEAG2B[/caption] The DS200TCEAG2B's other troubleshooting tool is a series of LED lights mounted on the side of the circuit board. Visible when the board card is installed in the drive board cabinet. If the green LED lights up, the board is powered up and running. When the board blinks, it indicates
The GE Emergency Overdrive board DS200TCEAG2B has a microprocessor and slots for multiple erasable Programmable read-only memory (EPROM) modules. It also contains 3 fuses, 30 jumpers, and a pair of bayonet connectors. The GE Emergency Overdrive plate DS200TCEAG2B is also equipped with multiple test points. Test points enable service personnel with appropriate equipment to test
The GE Emergency Overdrive board DS200TCEAG2BTF has a microprocessor and slots for multiple erasable Programmable read-only memory (EPROM) modules. It also contains 3 fuses, 30 jumpers, and 2 bayonet connectors. The 30 jumpers on the board enable the installer to configure the board to operate exactly as the driver requires. When the original board is
The DS200TCEAG2BTF is an emergency overdrive plate that is part of the GE Speedtronic Mark V gas turbine control system. The DS200TCEAG1B General Electric emergency overdrive board contains a microprocessor and several programmable read-only memory (PROM) modules. Also included are three fuses, 30 jumpers, and a pair of bayonet connections. The board keeps an eye
The GE Emergency Overdrive board DS200TCEAG2BTF has a microprocessor and slots for multiple erasable Programmable read-only memory (EPROM) modules. It also contains 3 fuses, 30 jumpers, and 2 bayonet connectors. The 30 jumpers on the board enable the installer to configure the board to operate exactly as the driver requires. When the original board is
The GE Emergency Overdrive board DS200TCEAG1BTF has a microprocessor and slots for multiple erasable Programmable read-only memory (EPROM) modules. It also contains 3 fuses, 30 jumpers, and 2 bayonet connectors. The 30 jumpers on the board enable the installer to configure the board to operate exactly as the driver requires. When the original board is
中文版
