The 1900/65 Universal Equipment Monitor is a mechanical vibration monitor, Designed for continuous monitoring and protection for a variety of applications And industry equipment. The low cost of 1900/65 made it a machine and Ideal solutions for processes, these machines and processes can benefit from continuous monitoring and protection, but cannot prove it The cost Details
The 3300 XL NSv* Proximity Sensor system is suitable for centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with stringent installation requirements. The 3300 XL NSv proximity Sensor system includes: 3300 NSv probe 3300 NSv extension cable 3300 XL NSv front-end * sensor. 1 The primary use of the Details
description The 3300 XL 25mm sensor system consists of a separate 25mm probe, one stick The extension cable consists of a 3300 XL 25mm preloader. 0.787 V/mm (20 mV/mil) output gives the system a linear range of 12.7 mm (500 mils). Based on This linear range, 3300 XL 25mm sensor system is suitable for Measurement Details
GE's Bently Nevada offers a wide variety of seismic and acceleration sensors, each designed to handle harsh industrial environments, and many capable of being installed in hazardous areas when appropriate barriers are used. The following sensors provide comparable performance to other seismic sensors, but allow for use at higher temperatures. Characteristics and advantages 330450 high Details
GE Bently Nevada offers a wide variety of vibration and thrust transmitters, each designed to handle the rigors of industrial environments, and many capable of being installed in hazardous areas when appropriate methods are used. The 990 Vibration transmitter is primarily targeted at Original equipment manufacturers (Oems) with centrifugal air compressors or small pumps, motors Details
The hydraulic dynamic pressure sensor system is composed of 350300 hydraulic dynamic pressure sensor using piezoresistive sensing technology and 146824 interconnection cable. It is used to measure static and dynamic pressures in fluid machinery, such as water turbines or centrifugal pumps. For hydraulic turbine applications, this measurement helps our customers monitor hydraulic phenomena such as Details
The 3500/25 Enhanced Keyphasor® Module is a semi-high dual-channel module used to provide key trust numbers to monitor modules in Rack 3500. The module receives an input signal from the proximity probe or magnetic pickup and converts the signal into a digital Keyphasor® signal that indicates when the Keyphasor mark on the shaft coincides with Details
The 16 channel relay module is a full height module that provides 16 relay outputs. Any number of 16-channel relay modules can be placed in any slot on the right side of the rack interface module. Each output of the 16-channel relay module can be programmed independently to perform the required voting logic. Each relay Details
The 3500/40M Proximitor® Monitor is a 4-channel monitor that accepts input from a Bently Nevada proximity sensor, adjusts the signal to provide a variety of vibration and position measurements, and compares the adjusted signal to a user-programmable alert. Users can program each channel of 3500/40m using 3500 rack configuration software to perform any of the Details
The 3500/42M Proximitor*/Seismic Monitor is a 4-channel monitor that takes input from proximity sensors and seismic sensors, modulates the signal to provide various vibration and position measurements, and compares the modulated signal to user-programmable alerts. Each channel of 3500/42m can be programmed by the user using 3500 rack configuration software to perform any of the Details