News

bently nevada 3500/92 Communication gateway

bently nevada 3500/92 Communication gateway [caption id="attachment_6191" align="aligncenter" width="600"] 3500/92[/caption] The Bently Nevada Bentley 3500 monitoring system is today's machine inspection system. This system is capable of collecting data through a variety of sensors as a system, providing continuous, online monitoring features suitable for mechanical protection applications. It is the most powerful and flexible system
Details

bently nevada 3500/53 overspeed detection module

Spot supply Bentley bently nevada 3500/53M tachometer module 3500/22M 3500/42M. Today Xiaobian with you to understand the 3500/53M tachometer module detection instrument classification introduction. Centrifugal speed, using centrifugal force and tension balance to indicate the speed. 3500/53M centrifugal tachometer is the most traditional speed measuring tool, is the use of centrifugal force principle of mechanical
Details

bently nevada 3500/50 RPM module

The 3500/50M Tachometer Module is a 2-channel module that accepts input from proximity probes or magnetic pickups to determine shaft rotative speed, rotor acceleration, orrotor direction. The module compares these measurements against user-programmable alarm setpoints and generates alarms when the setpoints are violated. The 3500/50M Tachometer Module is programmed using the 3500 Rack Configuration software.
Details

bently nevada 3500/45 differential expansion/axial position monitor

Main features of the product: Self-detection and fault-tolerant designs can be configured with multiple redundations, ranging from the addition of a second fully redundant power supply to a full triple modular redundancy (TMR) configuration for both selected channels and all channels, enabling the most mission-critical applications to be seamlessly integrated with the Bentley System1 condition
Details

bently nevada 3500/42M displacement/velocity acceleration monitoring

BENTLY NEVADA Bentley 3500/42M Features: Monitoring channels are set up in pairs and can perform up to two specified functions simultaneously. For example, channels 1 and 2 May perform one function, while channels 3 and 4 perform another or the same function. The Proximitor seismic monitor protects the machine by comparing the monitoring parameters to
Details

bently nevada 3500/40M Displacement monitor

bently nevada 3500/40M Displacement monitor Measurement point configuration requirements Key phase: each shafting of the compressor unit with the same speed is equipped with a key phase measurement point; Bentley 3300XL series eddy current sensor was used for measurement. Shaft vibration: Each sliding support bearing is equipped with a pair of X/Y direction (vertical installation
Details

bently nevada 3500/32 4-channel relay module

The Bently 3500 series of mechanical protection systems, monitors and Bentley vibration sensor probes fit well into a wide measurement range, making it an American Bentley vibration monitoring product. It can be used for measuring shaft vibration, shaft displacement, key phase, speed, overspeed protection, eccentricity, thermal expansion, differential expansion, etc., accepting from bently3300 eddy current
Details

BENTLY 3500/25 key phase module

Bentley Nevada (Bently Nevada) 3500 series online monitoring and protection system. Monitoring and protection system for your unit equipment to provide continuous online status monitoring and protection. The Bentley 3500 system works well with the Bentley vibration sensor probe and can accept Bentley converging eddy current sensors, velocity acceleration sensors (e.g. 330400 330500) and various
Details

BENTLY 3500/22M Frame interface module

The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley Nevada System 1TM machine management software. TDI separates the functions of 3500/20 framework interface modules (RIM) and communication handlers such as TDXnet. The TDI operates in the RIM slot of the 3500/22M frame and is used in conjunction
Details

BENTLY 3500/15 Power module

The 3500/15 AC and DC power supplies are half-height modules and must be installed in the specified slot on the left side of the rack. The 3500 rack can contain one or two power supplies with any combination of AC and DC. Either power supply can power the entire rack. The 3500/15 AC and DC
Details