News

bently nevada 3500/46M hydro monitor

The 3500/46M Hydro Monitor is a 4-channel monitor that accepts input from proximity, seismic and air gap sensors. The monitor conditions the signal to provide various vibration and position measurements, and compares the conditioned signals with user-programmable alarms. Hydro Radial Vibration channels combine the shaft gap movement with the NX amplitude to provide a measurement
Details

bently nevada 3500/90 communication gateway

The bently 3500 series of mechanical protection systems, monitors and Bentley (Bently Nevada) vibration sensor probes fit well with a wide measurement range, making it an American vibration monitoring product. It can be used for measuring shaft vibration, shaft displacement, key phase, speed, overspeed protection, eccentricity, thermal expansion, differential expansion, etc. Receive vibration signals from
Details

bently nevada 3500/77M cylinder pressure monitor

bently nevada 3500/77M cylinder pressure monitor Bently Nevada 3500/77M Bentley module reciprocating cylinder pressure monitor The 3500/77M reciprocating cylinder pressure monitor is a 4 channel monitor that Accept input from Bentley Nevada approved pressure sensors, condition Signals for various pressure measurements carried out in reciprocating motion Compressors, and compares the adjusted signal with the user
Details

bently nevada 3500/72M piston rod position monitor

The 3500/72M pole position monitor is a 4 channel monitor that accepts The input from our proximity sensor adjusts the signal for various dynamics And static position measurement, and will be adjusted after the signal with User programmable alerts are compared. 3500 Rack configuration software is OK Program each channel of 3500/72M to perform any
Details

bently nevada 3500/64M dynamic pressure monitor

The 3500/64M Dynamic Pressure Monitor is a single slot, fourchannel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor’s one measured variable per channel is bandpass dynamic pressure. You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional
Details

bently nevada 3500/62 process variable monitor

Bentley Bentley 3500 configuration requirements Each key compressor unit is equipped with a Bentley 3500 frame Each Bentley 3500 frame is equipped with redundant 3500/15 power modules Each Bentley 3500 frame is equipped with 3500/22m transient data interface module; For the above key phase measurement points, the corresponding 3500/25 key phase module is configured in
Details

bently nevada 3500/60 Temperature monitor

Detailed reference description Six channel 3500/60 (without recorder) processes signals from RTD (resistance temperature detector) and TC (thermocouple). The 3500/60 monitors temperature or temperature difference, usually for radial or thrust bearing metal temperatures conforming to API670, but also for critical process temperatures such as compressor suction and exhaust temperatures, steam temperatures, motor temperatures and stator
Details

bently nevada 3500/61 temperature monitor

The Bentley Bently Nevada 3500/61 163179-02 tachometer module is a 2-channel module, 3500/61 163179-02 it accepts input from the approach probe or magnetic sensor (unless otherwise stated) to determine shaft speed, rotor acceleration, or rotor direction, These measurements are compared to user-programmable alert set points and alerts are generated when these set points are violated.
Details

bently nevada 3500/20 Frame interface module

3500/20 Characteristic sensitivity: When terminated correctly and positioned at the calibration Angle, 20mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm) and 25 mm/s (1in/s) zero to peak ±5% frequency response at 100 Hz (6,000 cpm) Small operating frequency (see ordering information) to 1 kHz (60,000 cpm); Typical values range from +0 to ±3dB lead
Details

bently nevada 3500/01 Configuration software

bently nevada 3500/01 Configuration software [caption id="attachment_8728" align="aligncenter" width="600"] 3500/22M[/caption] Bently Nevada Bentley 3500 Series Monitor Product Overview: The bently3500 system monitors the vibration of large rotating machinery: steam turbines, water turbines, fans, compressors, turbo expanders, electric motors and generators, exciters, gearboxes, water pumps, and more. Bentley monitor type selection: 3500/40M vortex, 3500/42M vortex/watt vibration,
Details