The GE RST terminal board DS200TBQAG1ABB has two 90-pin terminal blocks and supports a maximum of 180 signal cables. Wiring terminals are marked TB1 and TB2. The GE RST junction panel DS200TBQAG1ABB also contains three 20-pin connectors. When you first install the GE RST terminal board DS200TBQAG1ABB, the written material accompanying the board describes the Details
The GE RST connector DS200TBQAG1A has two 90-pin terminals and supports a maximum of 180 signal cables. Wiring terminals are marked TB1 and TB2. The GE RST terminal board DS200TBQAG1A also contains three 20-pin connectors. The GE RST terminal board DS200TBQAG1A contains five screw holes for securing the board into the board holder. Because of Details
DS200TBPXG1A Power connection card The device is part of GE's DS200 line of printed circuit boards. These boards were built specifically for the Speedtronic Mark V Series electric turbine systems. AX Control Inc. is able to supply DS200 circuit boards as part of our industrial automation inventory. The printed circuit board is designated as a Details
The DS200TBPAG1A is a Mark V board assembly. It was built to accommodate one of GE's late-stage Speedtronic systems designed for managing gas and steam turbines. The Speedtronic series began with the release of MKI in the 1960s and continued to grow into the 1990s. Although GE no longer offers MKV components, they can be Details
The DS200TBCBG1AAA is a General Electric Mark V terminal analog board. AX Control has more than one such board in stock; Since every letter in the board identification ID is important, be sure to order the right board for your particular system. The Mark V Speedtronic system is used to control and maintain gas and Details
The DS200TBCBG1A board is used as the RTD input of the terminal module. The board is located within the <r5> core of the Mark V system.</r5> The kernel's signal is located on the TBCA terminal board and then written to the TCCA board, also located in the <r5> kernel.</r5> Signals 1-15 are written through the Details
The DS200TBCAG2AAB is a Mark V turbine control card. The Mark V is one of several turbine control systems released by GE under the "Speedtronic" umbrella. While most of these systems are now in legacy condition, making it difficult to find replacement parts for them, AX Control is committed to keeping these boards on hand. Details
IS420YDOAS1B is a controller module created by General Electric as part of the company's Mark VIe system. The Mark VIe is one of the most advanced systems GE sells under the name Speedtronic. These systems are used to manage and control industrial gas, steam and water turbines. [caption id="attachment_21218" align="aligncenter" width="450"] IS420YDOAS1B[/caption] The IS420YDOAS1B Details
As a quad-core controller, the IS420YAICS1B is designed to be extremely reliable and provide high-speed applications. The unit comes pre-loaded with software and firmware for its needs and is equipped with the QNX Neutrino operating system. This is a real-time multitasking operating system. [caption id="attachment_21344" align="aligncenter" width="600"] IS420YAICS1B[/caption] The front panel of the IS420YAICS1B provides Details
IS420UCSDH1A is a controller module created by General Electric as part of the company's Mark VIe system. The Mark VIe is one of the most advanced systems GE sells under the name Speedtronic. These systems are used to manage and control industrial gas, steam and water turbines. [caption id="attachment_21218" align="aligncenter" width="450"] IS420UCSDH1A[/caption] The IS420UCSDH1A is Details
中文版
