News

bently nevada 3500/64M dynamic pressure monitor

The 3500/64M Dynamic Pressure Monitor is a single slot, fourchannel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor’s one measured variable per channel is bandpass dynamic pressure. You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional
Details

bently nevada 3500/62 process variable monitor

Bentley Bentley 3500 configuration requirements Each key compressor unit is equipped with a Bentley 3500 frame Each Bentley 3500 frame is equipped with redundant 3500/15 power modules Each Bentley 3500 frame is equipped with 3500/22m transient data interface module; For the above key phase measurement points, the corresponding 3500/25 key phase module is configured in
Details

bently nevada 3500/60 Temperature monitor

Detailed reference description Six channel 3500/60 (without recorder) processes signals from RTD (resistance temperature detector) and TC (thermocouple). The 3500/60 monitors temperature or temperature difference, usually for radial or thrust bearing metal temperatures conforming to API670, but also for critical process temperatures such as compressor suction and exhaust temperatures, steam temperatures, motor temperatures and stator
Details

bently nevada 3500/61 temperature monitor

The Bentley Bently Nevada 3500/61 163179-02 tachometer module is a 2-channel module, 3500/61 163179-02 it accepts input from the approach probe or magnetic sensor (unless otherwise stated) to determine shaft speed, rotor acceleration, or rotor direction, These measurements are compared to user-programmable alert set points and alerts are generated when these set points are violated.
Details

bently nevada 3500/20 Frame interface module

3500/20 Characteristic sensitivity: When terminated correctly and positioned at the calibration Angle, 20mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm) and 25 mm/s (1in/s) zero to peak ±5% frequency response at 100 Hz (6,000 cpm) Small operating frequency (see ordering information) to 1 kHz (60,000 cpm); Typical values range from +0 to ±3dB lead
Details

bently nevada 3500/01 Configuration software

bently nevada 3500/01 Configuration software [caption id="attachment_8728" align="aligncenter" width="600"] 3500/22M[/caption] Bently Nevada Bentley 3500 Series Monitor Product Overview: The bently3500 system monitors the vibration of large rotating machinery: steam turbines, water turbines, fans, compressors, turbo expanders, electric motors and generators, exciters, gearboxes, water pumps, and more. Bentley monitor type selection: 3500/40M vortex, 3500/42M vortex/watt vibration,
Details

bently nevada 3500/92 Communication gateway

bently nevada 3500/92 Communication gateway [caption id="attachment_6191" align="aligncenter" width="600"] 3500/92[/caption] The Bently Nevada Bentley 3500 monitoring system is today's machine inspection system. This system is capable of collecting data through a variety of sensors as a system, providing continuous, online monitoring features suitable for mechanical protection applications. It is the most powerful and flexible system
Details

bently nevada 3500/53 overspeed detection module

Spot supply Bentley bently nevada 3500/53M tachometer module 3500/22M 3500/42M. Today Xiaobian with you to understand the 3500/53M tachometer module detection instrument classification introduction. Centrifugal speed, using centrifugal force and tension balance to indicate the speed. 3500/53M centrifugal tachometer is the most traditional speed measuring tool, is the use of centrifugal force principle of mechanical
Details

bently nevada 3500/50 RPM module

The 3500/50M Tachometer Module is a 2-channel module that accepts input from proximity probes or magnetic pickups to determine shaft rotative speed, rotor acceleration, orrotor direction. The module compares these measurements against user-programmable alarm setpoints and generates alarms when the setpoints are violated. The 3500/50M Tachometer Module is programmed using the 3500 Rack Configuration software.
Details

bently nevada 3500/45 differential expansion/axial position monitor

Main features of the product: Self-detection and fault-tolerant designs can be configured with multiple redundations, ranging from the addition of a second fully redundant power supply to a full triple modular redundancy (TMR) configuration for both selected channels and all channels, enabling the most mission-critical applications to be seamlessly integrated with the Bentley System1 condition
Details