bently nevada 3500/40M Displacement monitor

News
bently nevada 3500/40M Displacement monitor Measurement point configuration requirements Key phase: each shafting of the compressor unit with the same speed is equipped with a key phase measurement point; Bentley 3300XL series eddy current sensor was used for measurement. Shaft vibration: Each sliding support bearing is equipped with a pair of X/Y direction (vertical installation
Details
3500/22M

bently nevada 3500/32 4-channel relay module

News
The Bently 3500 series of mechanical protection systems, monitors and Bentley vibration sensor probes fit well into a wide measurement range, making it an American Bentley vibration monitoring product. It can be used for measuring shaft vibration, shaft displacement, key phase, speed, overspeed protection, eccentricity, thermal expansion, differential expansion, etc., accepting from bently3300 eddy current
Details

BENTLY 3500/25 key phase module

News
Bentley Nevada (Bently Nevada) 3500 series online monitoring and protection system. Monitoring and protection system for your unit equipment to provide continuous online status monitoring and protection. The Bentley 3500 system works well with the Bentley vibration sensor probe and can accept Bentley converging eddy current sensors, velocity acceleration sensors (e.g. 330400 330500) and various
Details

BENTLY 3500/22M Frame interface module

News
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring System and the Bentley Nevada System 1TM machine management software. TDI separates the functions of 3500/20 framework interface modules (RIM) and communication handlers such as TDXnet. The TDI operates in the RIM slot of the 3500/22M frame and is used in conjunction
Details
3500/15

BENTLY 3500/15 Power module

News
The 3500/15 AC and DC power supplies are half-height modules and must be installed in the specified slot on the left side of the rack. The 3500 rack can contain one or two power supplies with any combination of AC and DC. Either power supply can power the entire rack. The 3500/15 AC and DC
Details
4351B

Triconex 4351B Triconex 4351 B Tricon communication module

DCS
Triconex 4351B Triconex 4351 B Tricon communication module [caption id="attachment_2365" align="aligncenter" width="600"] 4351B[/caption] Manufacturer: Triconex Product No.: 4351B Product type: Tricon communication module Serial port: 4 Network port: 2 Port isolation: 500 VDC Protocols: TriStation, Modbus, TCP/IP, ICMP, SNTP, TSAA (supporting IP multicast), Trimble GPS, embedded OPC server (4353 and 4354 models), peer-to-peer (UDP/IP), peer-to-peer
Details
Triconex 8111

TRICONEX 8310N2 /TRICONEX 8111N rack >xiongba>sunny

DCS
TRICONEX 8310N2 /TRICONEX 8111N rack >xiongba>sunny [caption id="attachment_5783" align="aligncenter" width="600"] Triconex 8111[/caption] TRICONEX 8310N2 /TRICONEX 8111N rack >xiongba>sunny Precautions for card replacement of DCS and SIS system   Precautions for card replacement of DCS and SIS system 1、 Troubleshooting of DCS system The indicator light of the card is off for many times in the DCS
Details

Triconex 4000098-510/4000103-510N/4000056-006N/4000093-110N SIS CARD

DCS
Triconex 4000098-510/4000103-510N/4000056-006N/4000093-110N SIS CARD Triconex 4000098-510/4000103-510N/4000056-006N/4000093-110N SIS CARD TRICONEX TRICON 3007 CPU communicates with Honeywell (UCN) TRICONEX TRICON 3008 CPU communicates with Foxboro (DCS) TRICONEX TRICON 3009 CPU SIS system introduction In order to meet the requirements of safe production and hazardous chemical industry, in addition to the production control DCS system, the safety instrument
Details