IS200TBCIH1BBC GE

PLC
The IS200TBCIH1BBC is a device which is known as a contact terminal board. This is a PCB created for the Mark VI series. The Mark VI series is one of several series which make up the Mark lineup by General Electric or GE. These systems were developed to control all of the operations of gas
Details

DSDX451 ABB

PLC
DSDX451 cpus of the two hot spare systems are synchronized (the cycle period must be the same) - %O62.08 is 1 after two cpus are synchronized -CPU state is reflected by output bit %O62.10 - Which CPU controls the CS31 bus, its output bit %O62.10 is 1 - DSDX451 diagnostic status is given by the
Details

IS200TPROH1BBB GE

PLC
General Electric created the IS200TPROH1BBB protective termination board. This printed circuit board or PCB was developed for the Mark VI series. Mark VI and the other series in the Mark lineup are used to automate and manage all of the processes in industrial gas and steam turbines. The IS200TPROH1BBB protective termination board is long and
Details

FPR3346501R1012 ABB

PLC
FPR3346501R1012 main CPU scans all the inputs on the CS31 and updates the output in one cycle FPR3346501R1012 MiU hot spare CPU monitors on the CS31 bus, which scans for all inputs but does not perform output updates In the event of failure of the main CPU, the hot spare CPU becomes the master CPU
Details

IS200TVIBH2BBB GE

DCS, News, PLC
The IS200TVIBH2BBB was manufactured and created by General Electric as part of the company’s Speedtronic Mark VI turbine control line. Speedtronic systems are used to control functions and operations of industrial steam and gas turbine systems from large to small. The MKVI is designed to easily integrate, offering both control and protection features. The IS200TVIBH2BBB functions
Details

REM545 ABB

PLC
The REF 545 feeder terminal can be used with different kinds of switchgear, including single busbar, double busbar and duplex systems. The protection functions also support different types of networks, such as, isolated neutral networks, resonant-earthed networks and partially earthed networks. The application area also covers medium-sized three phase asynchronous motors as well as protection and control
Details

IS420ESWBH2A GE

PLC
Manufacturer General Electric Company Part / Model Number IS420ESWBH2A Product Type Ethernet / IONet Switch Series GE Speedtronic Mark VIe Weight 2lbs 5oz Product Description The IS420ESWBH2A is an unmanaged Ethernet switch typically used within General Electric’s Mark VIe Speedtronic system.  This is a control and management system for industrial hydro, gas, and steam turbine
Details

RET650 ABB

PLC
RET670/650 intelligent microcomputer protection device can provide fast and selective protection, monitoring and control functions for various types of transformers, such as two-reel transformer, three-reel transformer, power plant boost transformer and special railway transformer. Similarly, RET670 can also be used as autotransformer, RET650 phase shift transformer and shunt reactor with switching control to provide first-in
Details

REX521GHHPSH50G ABB

PLC
The REX521GHHPSH50G module is precise and dynamic for customized solutions Sex. It itself integrates two independent encoder inputs and can be used with Control Builder software set 10 different operation modes, and the highest counting frequency up to 300 KHZ. The REX521GHHPSH50G can also integrate PWM depending on the encoder mode Pulse output or plain
Details

SD834 ABB

DCS, News, PLC
SD834 new energy sector and other industrial applications, such as water and sewage treatment, are SD834 is a growing demand. Extended environmental conditions require high performance electronics, This is ABB's AC500 "Extreme Environment" product. The explanation is as follows: Extended operating temperature - Operating temperature -30°C to +70°C - -40°C Power on SD834 extended Vibration
Details