News

DS200TBCBG1AAA Mark V Terminal analog board

The DS200TBCBG1AAA is a General Electric Mark V terminal analog board. AX Control has more than one such board in stock; Since every letter in the board identification ID is important, be sure to order the right board for your particular system. The Mark V Speedtronic system is used to control and maintain gas and
Details

DS200TBCBG1A Terminal emulation card

The DS200TBCBG1A board is used as the RTD input of the terminal module. The board is located within the <r5> core of the Mark V system.</r5> The kernel's signal is located on the TBCA terminal board and then written to the TCCA board, also located in the <r5> kernel.</r5> Signals 1-15 are written through the
Details

DS200TBCAG2AAB

The DS200TBCAG2AAB is a Mark V turbine control card. The Mark V is one of several turbine control systems released by GE under the "Speedtronic" umbrella. While most of these systems are now in legacy condition, making it difficult to find replacement parts for them, AX Control is committed to keeping these boards on hand.
Details

IS420YDOAS1B Independent controller

IS420YDOAS1B is a controller module created by General Electric as part of the company's Mark VIe system. The Mark VIe is one of the most advanced systems GE sells under the name Speedtronic. These systems are used to manage and control industrial gas, steam and water turbines. [caption id="attachment_21218" align="aligncenter" width="450"] IS420YDOAS1B[/caption]   The IS420YDOAS1B
Details

IS420YAICS1B Industrial gas controller

As a quad-core controller, the IS420YAICS1B is designed to be extremely reliable and provide high-speed applications. The unit comes pre-loaded with software and firmware for its needs and is equipped with the QNX Neutrino operating system. This is a real-time multitasking operating system. [caption id="attachment_21344" align="aligncenter" width="600"] IS420YAICS1B[/caption] The front panel of the IS420YAICS1B provides
Details

IS420UCSDH1A Controller module

IS420UCSDH1A is a controller module created by General Electric as part of the company's Mark VIe system. The Mark VIe is one of the most advanced systems GE sells under the name Speedtronic. These systems are used to manage and control industrial gas, steam and water turbines. [caption id="attachment_21218" align="aligncenter" width="450"] IS420UCSDH1A[/caption] The IS420UCSDH1A is
Details

IS420UCSCH1C Four core Mark VIe controller

The IS420UCSCH1C is a four-core Mark VIe controller from General Electric. This is one of the most advanced Speedtronic controllers available from GE for managing industrial turbine systems. The IS420UCSCH1C features embedded EtherCAT, allowing the use of EtherCat I/O devices, such as linear and ring topologies and STI-EP Slice I/O. The controller also supports embedded
Details

IS420UCSCH1B Turbine system controller

The IS420UCSCH1B is a single-machine controller. It doesn't have any fans or batteries. The device does not have any user-configurable jumper Settings. The front panel of the controller provides two USB ports and five other ports as well as multiple LED indicators. Other controllers provide extended I/O. The unit can be used in applications such
Details

IS420UCSCH1A Processor module

The IS420UCSCH1A is a quad-core 1.2GHz AMD G-series processor. It has been certified for use in dangerous places. This type of installation usually has its own installation requirements. These can be found in GE's Mark VIe and Mark VIeS Control Systems General Application System Guide (Volume II), GE number GEH-6721.     [caption id="attachment_21217" align="aligncenter"
Details

IS420UCSBS1A Controller of the system

The IS420UCSBS1A is a controller for GE Mark VIe systems. This was one of the last Speedtronic systems released by GE for managing industrial gas and steam turbines. The IS420UCSBS1A is one of five UCSB controllers available in the Mark VIe system. It is a quad-core controller that delivers high performance and optimal reliability. The
Details